Onewheel

The Onewheel GT is the latest board from Future Motion Inc., overtaking their old flagship model Onewheel XR. At first, glance what’s clear is that the new GT is both thicker and heavier than the XR. Let’s look under the hood, here is the breakdown of the differences and similarities between the Onewheel GT and XR. … Read more

Future Motion Inc. has released two new boards on the market the Onewheel Pint X and the Onewheel GT. This release has been a long wait from the community and at last, the XR gets a real facelift with the GT. Let’s start with the ”smaller” board, the Onewheel Pint X. Onewheel Pint X Future … Read more

“Riding a Onewheel, turning the ordinary commute into a way to float, removing the stress of everyday life.” Oskar Fällman “Riding a Onewheel demands respect for the limits of the board, the terrain, and the balance between them.” Oskar Fällman “Don’t look back your’re not going that way.” Oskar Fällman “Life is better when you … Read more

If you are looking to make your Onewheel Pint more water resistant and protect the motor a bearing cover is a must to install. At the moment there are two ways, either buy them from Badger Wheel or if you have access to a 3D printer, print some covers yourself. The bearing covers with the … Read more

Future Motion Inc. has with the latest hardware versions on both the Onewheel XR and Pint paired the BMS and the controller together to hinder battery upgrades and repairs. The JWFFM Chip allows Onewheel owners the possibility to upgrade their Onewheels with extended battery options and fix the boards. IMPORTANT: JWBatteries is in no way … Read more

The worst thing has happened, you are planning to head out and find that you got a flat tire on your Onewheel. Most punctures on your board can easily be fixed if they are small enough because the tire comes with tire sealant inside from the factory. The pressure of the escaping air forces the … Read more

If your grip tape is dirty it’s way better to clean it compared to changing it out. The Onewheel front footpad has a sensor underneath it and removing the tape is a delicate procedure. You should always try to clean the grip tape to try and restore it as the first step and once your … Read more

If you are having problems with your board pushing the nose up even if you have a battery that’s above 50%. This phenomenon is in the boarding community called Captain Morgan, it usually happens when the board is close to empty. If the board pushes up the nose with a battery that’s not empty then … Read more

The latest company to get sued by Future Motion Inc. is JW Batteries around their JWFFM chip. The chip enables the external or larger batteries to be used in the Onewheel Pint and Onewheel XR, and bypasses the parring between the BMS and controller. This parring has been in place from the start of the … Read more